Check my GPU →

Can the Mac 128 GB run Chroma1-HD?

Yes. 16-bit fits on the Mac 128 GB with 95.3 GB to spare.

Image model · 8.9B128 GB unified · ~115.4 GB for the GPU · 300–800 GB/s · Apple SiliconData 2026-10-01
Runs well
Yes, with room to spare.

16-bit (17.8 GB) needs about 20.1 GB in use, so 95.3 GB of the 115.4 GB stays free: room for a larger image, a LoRA or a ControlNet.

Best file16-bit
File size17.8 GB
GPU memory needed~20.1 GB
Shared memory29 / 128 GB
Memory map · Mac 128 GB20.1 GB / 115.4 GB
058 GB115 GB
Weights 16-bit · 17.8 GBWorking memory · 1.5 GBReserve · 0.8 GBFree · 95.3 GB

01What to download

PartFileFolderSize
ModelChroma1-HD.safetensors
16-bit · lodestones/Chroma1-HD
models/diffusion_models17.8 GBDownload →
Text encodert5-v1_1-xxl-encoder-Q8_0.gguf
T5-XXL GGUF Q8_0 · city96/t5-v1_1-xxl-encoder-gguf
models/text_encoders5.1 GBDownload →
VAEae.safetensors
FLUX.1 VAE (ae) · lodestones/Chroma
models/vae0.3 GBDownload →
Total download · keep about the same free on disk23.2 GB

Alternatives: T5-XXL FP16 (9.8 GB). On a Mac, FP8 text encoders do not load, so a 16-bit one is listed - or a GGUF one, loaded with “CLIPLoader (GGUF)” from the ComfyUI-GGUF nodes. Sizes from Hugging Face, 2026-10-01.

Free ComfyUI workflow, tested on my RTX 5060 Ti: FP8 workflow (.json). Drag the file into ComfyUI. All workflows →

Shared memory: about 29.2 GB of your 128 GB. On this machine the model, the text encoder, the VAE and the operating system all use the same memory. That leaves room, so nothing has to be swapped to disk. calculated

02Every Chroma1-HD file on 115.4 GB

FileSizeNeededOn this cardQualityDownload
16-bit ←
SAFETENSORS · lodestones
17.8 GB20.1 GBfits · 95.3 GB sparethe original weightsHugging Face →
Q8_0
GGUF · silveroxides
9.7 GB12.0 GBfits · 103.4 GB sparepractically identical to the originalHugging Face →
Q6_K
GGUF · silveroxides
7.7 GB10.0 GBfits · 105.4 GB sparevery close to the originalHugging Face →
Q5_K_M
GGUF · silveroxides
6.7 GB9.0 GBfits · 106.4 GB spareclose; small differences in fine detailHugging Face →
Q4_K_M
GGUF · silveroxides
5.6 GB7.9 GBfits · 107.5 GB sparegood; some loss in fine detail and textHugging Face →
Q3_K_S
GGUF · silveroxides
4.3 GB6.6 GBfits · 108.8 GB sparenoticeable loss of detailHugging Face →
Q2_K
GGUF · silveroxides
3.4 GB5.7 GBfits · 109.7 GB spareheavy loss; a last resortHugging Face →

“Needed” adds 1.5 GB of working memory for Chroma1-HD and a 0.8 GB reserve. Sizes 2026-10-01. FP8 and INT8 files are left out on a Mac: Apple GPUs cannot compute FP8, so ComfyUI either fails to load them or converts them back to 16-bit, which saves no memory. Use a 16-bit or GGUF file.

03Measured and reported results

Nobody has sent measured numbers for this pair yet. If you run Chroma1-HD on a Mac 128 GB, send your time per image and peak VRAM and it will appear here, credited.

04About the Mac 128 GB

A Mac with 128 GB shares that memory between the CPU and the GPU. On current macOS the GPU may use about 115.4 GB of it by default (older macOS versions: about 103.1 GB); that is the figure used here. ComfyUI can go past it, but macOS then starts compressing and swapping memory and everything slows down. ComfyUI runs on Apple GPUs through PyTorch's MPS backend. 16-bit and GGUF files work; FP8 and INT8 files do not save memory on a Mac, so they are skipped. Speed is the catch: even the fastest Macs are several times slower per image than a desktop RTX card. Chips sold with 128 GB: M1 Ultra, M2 Ultra, M3 Max, M4 Max, M5 Max (memory bandwidth 300–800 GB/s - the higher, the faster). Everything about Macs and local AI →

128 GB unified · ~115.4 GB for the GPU · 300–800 GB/s · Apple Silicon. Everything that runs on it →

05Questions

How much VRAM does Chroma1-HD need?

Around 5.7 GB with the smallest file (Q2_K) and 11.5 GB with an 8-bit file (FP8). The full 16-bit file needs about 20.1 GB.

Which Chroma1-HD file should I download for the Mac 128 GB?

16-bit (17.8 GB) from lodestones/Chroma1-HD.

FP8 or Q8_0 for Chroma1-HD on the Mac 128 GB?

Q8_0 (9.7 GB). The Mac 128 GB has no FP8 maths, so FP8 (9.2 GB) only saves memory and is a step further from the original.

How much do I need to download for Chroma1-HD on the Mac 128 GB?

23.2 GB: Chroma1-HD.safetensors, t5-v1_1-xxl-encoder-Q8_0.gguf, ae.safetensors.