Can the RTX 5070 Laptop 8 GB run Wan 2.2 I2V A14B?
Not entirely. Even Q2_K is 1.6 GB over 8 GB, so ComfyUI keeps part of it in system RAM.
Nothing fits entirely, but Q2_K (5.3 GB) overflows by only about 1.6 GB. ComfyUI keeps that part in system RAM automatically: slower than a full fit, but usable.
Also try the FP8 file (14.3 GB) on this GPU. It does not fit entirely, but a current ComfyUI streams the overflow from RAM and native 8-bit files often beat a small GGUF that does fit. Dynamic VRAM →
Using Kijai's WanVideoWrapper instead of the native nodes? Its WanVideo BlockSwap node keeps part of the model in system RAM. To run the FP8 file (14.3 GB) on RTX 5070 Laptop 8 GB, start with blocks_to_swap ≈ 31 (of 40). Each block is about 0.4 GB; raise the number if you still run out of memory, lower it for speed. estimate WanVideoWrapper →
01With more VRAM
With 20 GB you could run Wan 2.2 I2V at 8-bit or better (FP8, 14.3 GB) with no offloading.
02Every Wan 2.2 I2V file on 8 GB
| File | Size | Needed | On this card | Quality | Download |
|---|---|---|---|---|---|
| 16-bit SAFETENSORS · Comfy-Org | 28.6 GB | 32.9 GB | 24.9 GB too big | the original weights | Hugging Face → |
| FP8 SAFETENSORS · Comfy-Org | 14.3 GB | 18.6 GB | 10.6 GB too big | practically identical to the original | Hugging Face → |
| Q8_0 GGUF · QuantStack | 15.4 GB | 19.7 GB | 11.7 GB too big | practically identical to the original | Hugging Face → |
| Q6_K GGUF · QuantStack | 12.0 GB | 16.3 GB | 8.3 GB too big | very close to the original | Hugging Face → |
| Q5_K_M GGUF · QuantStack | 10.8 GB | 15.1 GB | 7.1 GB too big | close; small differences in fine detail | Hugging Face → |
| Q4_K_M GGUF · QuantStack | 9.7 GB | 14.0 GB | 6.0 GB too big | good; some loss in fine detail and text | Hugging Face → |
| Q3_K_M GGUF · QuantStack | 7.2 GB | 11.5 GB | 3.5 GB too big | noticeable loss of detail | Hugging Face → |
| Q2_K ← GGUF · QuantStack | 5.3 GB | 9.6 GB | spills 1.6 GB | heavy loss; a last resort | Hugging Face → |
“Needed” adds 3.5 GB of working memory for Wan 2.2 I2V and a 0.8 GB reserve. Sizes 2026-10-01. Wan 2.2 A14B uses two files of this size (high-noise and low-noise); only one sits in VRAM at a time, both must fit in system RAM.
03What to download
| Part | File | Folder | Size | |
|---|---|---|---|---|
| Model | Wan2.2-I2V-A14B-HighNoise-Q2_K.gguf high-noise model (early steps) Q2_K · QuantStack/Wan2.2-I2V-A14B-GGUF | models/unet | 5.3 GB | Download → |
| Model | Wan2.2-I2V-A14B-LowNoise-Q2_K.gguf low-noise model (late steps) Q2_K · QuantStack/Wan2.2-I2V-A14B-GGUF | models/unet | 5.3 GB | Download → |
| Text encoder | umt5_xxl_fp8_e4m3fn_scaled.safetensors UMT5-XXL FP8 (scaled) · Comfy-Org/Wan_2.1_ComfyUI_repackaged | models/text_encoders | 6.7 GB | Download → |
| VAE | wan_2.1_vae.safetensors Wan 2.1 VAE · Comfy-Org/Wan_2.2_ComfyUI_Repackaged | models/vae | 0.3 GB | Download → |
| Total download · keep about the same free on disk | 17.6 GB | |||
Alternatives: UMT5-XXL FP16 (11.4 GB). Sizes from Hugging Face, 2026-10-01.
04Measured and reported results
Nobody has sent measured numbers for this pair yet. If you run Wan 2.2 I2V on a RTX 5070 Laptop 8 GB, send your time per image and peak VRAM and it will appear here, credited.
05About the RTX 5070 Laptop 8 GB
The RTX 5070 Laptop 8 GB is a Blackwell GPU with FP8 and FP4 hardware: ComfyUI computes Comfy-Org's FP8 files natively here, and NVFP4 files (where a model offers them) are faster still. As a laptop GPU it runs at a lower power limit than desktop cards (50–100 W depending on the laptop). The memory verdicts are the same; speed depends heavily on how much power the laptop maker allows.
8 GB GDDR7 · 128-bit · 384 GB/s · Blackwell · 50–100 W. Everything that runs on it →
06Questions
How much VRAM does Wan 2.2 I2V need?
Around 9.6 GB with the smallest file (Q2_K) and 18.6 GB with an 8-bit file (FP8). The full 16-bit file needs about 32.9 GB.
Which Wan 2.2 I2V file should I download for the RTX 5070 Laptop 8 GB?
Q2_K (5.3 GB) from QuantStack/Wan2.2-I2V-A14B-GGUF. Load it with Unet Loader (GGUF) from the ComfyUI-GGUF node pack.
FP8 or Q8_0 for Wan 2.2 I2V on the RTX 5070 Laptop 8 GB?
FP8 (14.3 GB): the RTX 5070 Laptop 8 GB computes it natively, while Q8_0 (15.4 GB) is unpacked on the fly.
How much do I need to download for Wan 2.2 I2V on the RTX 5070 Laptop 8 GB?
17.6 GB: Wan2.2-I2V-A14B-HighNoise-Q2_K.gguf, Wan2.2-I2V-A14B-LowNoise-Q2_K.gguf, umt5_xxl_fp8_e4m3fn_scaled.safetensors, wan_2.1_vae.safetensors.